Symbol PTC-2124, Руководство пользователя

Страница: 96 / 114

Chapter 3 Configuring TN-3270/5250
84 PTC-2124 User’s Guide
10. Slide a 3/8 in. washer onto the bolt.
11. Slide the terminal ring on the power wire’s fuse
link onto the bolt.
12. Slide a second 3/8 in. washer onto the bolt.
13. Thread a 3/8 in. nut onto the bolt.
14. Tighten the nut securely.
Connecting to a battery with side terminals
The following items are required for connecting the
power wire directly to a battery:
• A length of wire
• Two crimped splices
• A power drill and an assortment of drill bits
• A snap-in bushing
• A wire stripping/crimping tool
• A fuse link
• A 3/8 in. terminal ring
• A 3/8 x 1 1/2 in. bolt
• A 3/8 in. nut
• Two 3/8 in. washers
• Socket wrenches or box wrenches
Refer to Figure 8 as you perform the following steps:
If the wire is not long enough, you
will need an additional length of
wire. 1. Determine whether the power wire is long enough
to reach the battery’s positive (+) terminal.
2. If necessary, use a crimped wire splice (for #18
AWG) to join the additional length of wire to the
power wire after cutting off the spade lug.