Swisson XND-4D, Руководство пользователя

Страница: 19 / 34

19
Auto Universe Label
This menu is only shown when Art-Net RDM is enabled. Auto Universe Label is a functionality to automatically show
the universe number of an XND-4 port on the display of connected Swisson devices supporting this. When enabled,
the universe number is transmitted every two seconds with a small standard compliant RDM packet. Therefore, the
labels are only present on output ports with
Art-Net RDM enabled. Auto Universe Label RDM packets are
transmitted as so called vendorcast messages and are ignored by every standard compliant DMX and RDM receiver
not manufactured by Swisson.
The following depiction shows an example setup using the Auto Universe Label feature.
Input Settings
3
Transmit Mode
Under Transmit Mode , the transmission behaviour of Art-Net or sACN data can be configured with the following
settings:
•
Broadcast/Multicast : DMX data applied to the input port is transmitted to the directed broadcast IP address
(multicast for sACN). Every reachable device in the same subnet can receive the data.
•
Unicast: DMX data applied to the input port is transmitted to a unicast IP address set by the user. Only one
network device with matching IP address can receive the data.
Destination IP
This menu only appears when the Transmit Mode is set to Unicast . After opening the menu, an IP address edit
window is shown. This window allows for configuring a unicast destination IP address, similar to the IP address edit
windows in section
Network Settings .
Local Forwarding
This menu only appears when the Transmit Mode is set to Unicast and allows to enable or disable the forwarding of
DMX data to the local ports of the node. If Transmit Mode is set to Broadcast/Multicast , the data is always
forwarded.
•
Enabled : DMX data applied to an input port is forwarded to local DMX outputs of this node, if
universe and protocol of the output port is matching with the input port.
•
Disabled : DMX data is only transmitted to the configured unicast IP address and not present on local
output ports of this node.
3
Available only on firmware version 1.04 and newer