Swisson XND-4D, Руководство пользователя

Страница: 21 / 34

21
•
Art-Net, no RDM:
o
Same as Art-Net, RDM disabled on all ports.
•
sACN:
o
Network is configured via DHCP.
o
Art-Net RDM is enabled.
o
Ports 1 – 4 are configured to sACN universes 1 – 4
•
1,2: Art-Net – 3,4: sACN:
o
Loads default network settings (IP address set to primary Art-Net IP address).
o
Art-Net RDM is enabled on all ports. Note: affects port 1 and 2 only while port 3 and 4 are
configured to output data from sACN.
o
Ports 1 and 2 are configured to Art-Net universe 0 and 1 (Art-Net sub-net: 0, Art-Net net: 0).
o
Ports 3 and 4 are configured to sACN universe 3 and 4.
•
Art-Net, Office Network:
o
Same as Art-Net but network is configured via DHCP.
Loading any of the presets disables independent Art-Net universes (Independent Universes, page 14).
Device Settings and Information
Address Display Mode
Under Address Display Mode , a selection list is presented to you with the following options:
•
Decimal : Art-Net net, Art-Net sub-net, Art-Net or sACN universe and Art-Net sub-uni are displayed as
decimal numbers.
•
Hexadecimal : Art-Net net, Art-Net sub-net, Art-Net or sACN universe and Art-Net sub-uni are presented as
hexadecimal numbers with a trailing h (e.g. F3h).
A bullet point is shown next to the currently active setting. Use the encoder wheel to select the desired setting and
push [OK], to apply the setting.
Web Interface
4
Under Web Interface , a selection list is presented to you with the following options:
•
Enable : The web interface is enabled.
•
Disable : The web interface is disabled.
A bullet point is shown next to the currently active setting. Use the encoder wheel to select the desired setting and
push [OK] to apply the setting. Changing this setting, requires a restart of the node. A popup will ask for
confirmation. Press [OK] to restart now or [Cancel] to abort.
This option of the device settings is only available as of firmware version 1.03. Further information can be found on
page 27.
Screen Saver
Under Screen Saver , a selection list is presented to you with the following options:
•
Enable : Screen saver is enabled.
•
Disable : Screen saver is disabled.
4
Web interface only available on devices produced after 2017 (hardware rev. 1.0-b)