Swisson XND-4D, Руководство пользователя

Страница: 24 / 34

24
UIDs
The RDM UIDs (unique identifiers) of the four output ports. These are numbers that unambiguously identify any
RDM device. Since each output port may act as an RDM controller, each output port has assigned its own RDM UID.
Restore Default Settings
The default settings can be restored under Home > Menu > Restore Default Settings . In this menu, you will be asked
whether you want to continue restoring all settings. Push [OK] to confirm or [Cancel] to abort.
The default settings can also be restored from the
Device Settings Page of the web interface as described on page 28.
This function will restore all settings to the defaults:
•
Name: SWISSON XND-4
•
Short name: XND-4
•
Art-Net net: 0
•
Art-Net sub-net: 0
•
Art-Net RDM: Disabled on all output ports
1
•
Auto universe label: Enabled
2
•
Independent universes: Disabled
3
•
Art-Net version: Art-Net 4
4
•
All outputs enabled
•
DMX output mode (all ports): Relaxed
5
•
Art-Net universe output 1-4: 0-3
•
Failure behaviour (all outputs): Hold last look
•
Merge mode (all outputs): HTP
•
Input transmit mode: Broadcast/multicast
•
Input destination IP: 127.0.0.1
•
Input local forwarding: Enabled
•
IP address: 2.X.Y.Z (primary Art-Net IP address)
•
Netmask: 255.0.0.0
•
Address display mode: Decimal
•
LEDs: Unmuted
•
Screen saver: Disabled
•
User input locking: Disabled, password not set
•
Web interface: Enabled
6
1
For firmware versions 0.99 and earlier, RDM enabled per default.
2
Available on firmware version 1.04 and newer only
3
Available on firmware version 1.00 and older
4
Available on firmware version 1.01 and newer only
5
Firmware versions 0.99 and 1.00: Max. frame rate
6
Available on firmware version 1.03 and newer only