Swisson XND-4D, Руководство пользователя

Страница: 27 / 34

27
Web Interface
As of firmware version 1.03 the XND-4 allows the use of a web interface
1
hosted by the device. Through this
interface the status may be observed, settings can be adjusted, and firmware updates can be carried out. The web
interface is accessed by typing the devices configured IP address in a web browser of a computer, that is connected
to the same network as the XND-4.
Status Page
The status page is the first to welcome
the user after accessing the web
interface. It lets the user get an
overview over every individual port
’ s
status and configuration at a quick
glance. In addition to the overview a
toggle switch can be enabled to set the
device identified.
The ports can display five different status messages, like the ones described on page 11:
•
OK : The port is receiving/transmitting successfully.
•
No Update : Not receiving any updates on this universe for the last 10 seconds.
•
Off : The port is currently disabled through settings made by the user.
•
No DMX : The port is not receiving/transmitting any DMX.
•
Error : The port is producing errors and requires user intervention.
Port Settings Page
On the port settings page each port can
be configured individually, or changes
can be applied to multiple ports at once.
To configure the ports separately, select
the number in the top menu first, after
which changes can be made to the
settings. Once the changes are made,
they can be sent to the device by
pressing the apply button.
More information on the port settings
can be found on page 16.
When setting up multiple ports at the
same time under the Setup tab, the user
has the option to select which ports the
changes should be applied to and
choose to autoincrement the universe number along the ports that are being configured.
1
Web interface only available on devices produced after 2017 (hardware rev. 1.0-b)