Swift Motorhomes 2013, Руководство по обслуживанию и гарантии владельца

Страница: 75 / 205

ELECTRICS
73
3.6 Solar Charge Management
EC468 and EC469 PSU’s incorporate a
built-in solar charge management feature,
which will control the input from a separate
solar panel and regulator. Depending on
the charge state of the batteries, the solar
power will be directed to the required
battery, and continuously monitored to
ensure optimum operation. For this system
to operate intelligently, the shutdown
button should be left switched on. If the
shutdown button is turned off then the
solar panel will charge the vehicle battery
only.
3.7 System Status and Configuration
display
On the 468 & 469 PSU, the unit contains
an LCD display and two control buttons
that allow system information to be viewed
or settings changed.
Press the top yellow ‘select’ button to
change the item being viewed. Press the
bottom red ‘change’ button to change
the setting. Both buttons work on a
continuous loop, so if you want to return
to an item or setting keep pressing the
button until the required item is reached.
The EC468 and EC469 PSU’s also contain
a status display unit that can be used to
view system information. Press the top
yellow ‘select’ button to change the item
being viewed.
3.8 Water System Operation
The control panel pump button operates
the internal (onboard) water pump. This
pump will draw water from the internal
(onboard) water tank.
The system also incorporates a separate
powered water inlet that can be used with
an external filler pump to fill the internal
(onboard) water tank.
The water tanks (fresh & waste, where
fitted) incorporate a level warning feature
to warn the user when the fresh water
level drops below 25% or when the
waste water level reaches 100%. If the
water pump power is turned on and the
fresh water level drops to below 25% a
warning beep will be heard and the fresh
gauge empty LED will flash. To cancel the
warning, press the levels button.
If the water pump power is turned on and
the waste water level rises to full (100%) a
warning beep will be heard and the waste
gauge full LED will flash. To cancel the
warning, press the levels button. These
warnings will not be repeated unless
the water pump power switch is turned
off and on again. This is to ensure the
warning does not become a nuisance.