Swift Motorhomes 2013, Руководство по обслуживанию и гарантии владельца

Страница: 100 / 205

FITTED EQUIPMENT
98
Switching off
Set the control knob on the heating system to
‘0’ (the auto ignitor is simultaneously switched
off.).
Switch off fan (set rotary switch ‘0’).
If the device is not used for a longer period,
close the quick-acting valve in the gas supply
line and gas cylinder.
Maintenance
In Germany, the Truma Service Center is
generally to be notified in case of any faults;
the respective service partners are available
in other countries (see Truma service book or
www.truma.com).
n
Despite careful production, the heating
system can contain parts with sharp edges,
therefore always wear protective gloves for
maintenance and cleaning work!
4
Observe the ESD - regulations!
The electronics can be damaged by the
danger of electrostatic charge. Only experts
may carry out repair work!
Cleaning
(only with the device switched off!)
It is recommended to remove the dust that has
collected on the heater exchanger, floor plate
and on the fan wheel on the Truma warm air
system at least once per year at the beginning
of the heating season. Carefully clean the fan
wheel with a paint brush or small brush.
Remove Cover
!
Only remove the cover with the heating
switched off and cold.
By simultaneously pressing both closure
levers (1) outwards, the cover is unlocked. It
can be pivoted out and lifted out of the lower
bearings.
Attach cover
Suspend the cover (1) in the bottom bearing
and pivot in (2) until the lock audibly clicks into
place. Check the tight fit by pulling.
Battery change on the auto ignitor
If ignition sparks cannot be heard when
commissioning or only at intervals of more
than one second, the battery needs to be
replaced.
Only change the battery with the heating
system switched off. Insert a new battery
before the beginning of each heating season!
Dispose of the old battery correctly!
TRUMA S 3004 SPACE HEATER