Swift Motorhomes 2013, Руководство по обслуживанию и гарантии владельца

Страница: 192 / 205

MAINTENANCE
188
• Clean the toilet and empty the cassette
and lubricate the seals with an acid free
lubricant such as Thetford High Grade
Seal Lubricant. See Thetford toilet Users
manual
Exterior (Body / Chassis)
• Ensure that all windows, skylights and
access doors are closed and secured.
• Ensure all fixed ventilation points (high
and low) are clear from debris and
obstructions.
• Ensure the vehicle is not parked where
falling debris (i.e. leaves, tree sap) could
cause damage.
• Avoid leaving the vehicle parked in soft
ground, long grass or a potential area
where standing water may form.
• Lubricate relevant points on the chassis.
Wheels and Tyres
• Do not store in one position with partially
deflated tyres. The tyre walls will suffer
and do present a real danger of blow outs,
especially when travelling at faster speeds
than are allowed in the UK.
The wheels should be turned every couple
of weeks. If you are removing the wheels,
follow the jacking procedure for changing
a wheel.
Check your tyres regularly for signs of
age and deterioration, particularly wear,
cracking and blistering. If in doubt consult
a reputable tyre fitter.
• A purpose made cover maybe used, but
please ensure the cover is a good fit,
breathable and securely fitted.
Note: A poorly fitted cover can rub and
damage the bodywork. Non-breathable
covers will encourage mould to grow.
Interior (Furniture / furnishings)
• Open all lockers and internal doors, to
ensure good circulation.
• Remove cushions and store them in a dry
location or ensure all cushions are placed
in a well ventilated area.
• Close all blinds and curtains. Customers
are reminded to check the tension on
blinds after storage if left closed for long
periods.
• Thoroughly ventilate the motorhome by
opening doors or windows periodically.
• Placing water absorbent crystals in the van
during the winter months, will help reduce
moisture levels and mould growth.
• We do not recommend leaving portable
heaters in the van unattended.
Recomissioning the Water System
Re-connect the water pump by positioning
the pipe connectors into the pump housing
and pushing the blue tabs into position. It is
advisable, after a period on non-use, to flush
the water system with a sterilising fluid such as
Milton 2. Fill the fresh water tank with water
and sterilising fluid (Refer to sterilising fluid
instructions for the amount to use). Turn the
pump on and open all the taps, ensuring that
the water drains away safely to the waste tank.
When the waste tank is full empty the fluid into
a designated waste water area. Re-fill the tank
with fresh water and flush through the system
as described above; repeat this until all traces
of the sterilising fluid have been flushed out.
(See "priming the Water System" and "Waste
Tank" sections on page 44/45)
Prepare the toilet system by adding water and
Thetford fluid to the toilet waste tank. See
"Preparing the Thetford Cassette Toilet for
Use" on page 146.
Appliances
Before starting motor caravanning after
storage, check all gas appliances and electrical
points.
Note: Preferably not less than once a year, the
electrical installation should be inspected and
tested by a qualified electrician.
After storage it is advisable to air the
Motorhome and clean throughout, especially
cooking appliances and the refrigerator.
MAINTENANCE