Swift Motorhomes 2013, Руководство по обслуживанию и гарантии владельца

Страница: 180 / 205

FITTED EQUIPMENT
178
SEAT SWIVEL / SIDE LOCKERS/
/ BUNK AND LUTON SAFETY / TABLES
CARE OF LAMINATE TOPS,
TABLES, FURNITURE
AND DOORS
DO NOT use abrasives, chemically treated
cloths or aggressive detergents as these may
cause damage
DO NOT place hot objects on laminated
surfaces i.e. tops, tables. Any temperatures
70°C and over will cause permanent damage.
Clean worktop surfaces, furniture and door
fascias with a soft, slightly damp cloth, dry off
with a soft cloth.
DROP DOWN TV MECHANISM
In some models, a drop down TV mechanism
is used. Customers are reminded to engage
both positive locks, on the underside of the TV
mechanism before travelling. Failure to do so
may result in damage of the TV unit or the TV
shelf itself. The inner dimensions (i.e. maximum
TV size) for this unit is 336mm high x 390mm
wide x 70mm deep.
12V READING LAMP
Warning: 12v reading/spotlamps
generate high temperatures when in
use, the body, lens/bulb may become
very hot.
Never make directional adjustment in
the direction of flammable materials i.e.
Curtains, nets or blinds.
TV INLET
Depending on specification, the motorhome
may be fitted with an external co-ax
connection in place of, or in addition to,
connections for a roof mounted TV aerial. The
external co-ax connection point will be within
the battery box (Escape models) or the mains
inlet enclosure (Sundance, E400, Borero and
E500 models).
Co-ax connection within battery box
Within the battery box a White cover flap
conceals a push-on type co-ax connection. A
co-ax cable is fitted and connected within the
motorhome from the back of this connection
to the TV position within the motorhome.
An external TV aerial or site TV feed can be
connected to the external connection point;
signals from that connection will then be
available at the TV position co-ax socket within
the motorhome.
Co-ax connection point within the mains
inlet enclosure
A short co-ax lead featuring a screw on co-ax
connection will be present behind the Blue
mains inlet connector. A co-ax cable will be
fitted and connected within the motorhome,
from the back of this connection, to the
primary TV position within the motorhome. At
the same time, further co-ax cable or cables
will be fitted which route from a likely TV aerial
position (i.e. within the wardrobe) to each of
the TV positions within the motorhomes.
The primary TV position will feature a socket