Swift Motorhomes 2013, Руководство по обслуживанию и гарантии владельца

Страница: 135 / 205

FITTED EQUIPMENT
133
Automatic operation
WARNING!
Fig. 20
1
5
To start the refrigerator, press button (1) for 2
seconds.
The refrigerator starts with the last selected
type of energy.
Automatic operation :
Press button(5) : A
Upon switching on, the electronics
automatically selects one of the three possible
energy types: 230V - 12V - liquid gas. The
control electronics automatically ensures that
the refrigerator is supplied with the optimum
source of energy in each respective case.
Sequence of priority: 1.) Solar (12V -)
2.) 230V ~
3.) 12V -
4.) Liquid gas
i
If sufficient mains voltage is available (more
than 195 V), this power source is selected
as prime option. If a solar system capable of
powering the refrigerator is installed, the solar
12V supply takes priority. The 12V operation
is otherwise only effective while the engine is
running.
According to the sequence of priority the
electronics selects GAS as energy source only,
if both of the electrical energy source are not
available.
Manual operation is possible at any time.
For Setting of cooling compartment
temperature see point “4.7.2”
Refuelling while in AES mode operation
i
In order to prevent unintended switching to
gas operation during refuelling, the electronic
system starts gas operation of the refrigerator
after the motor has been turned off for 15
minutes. During this period the appliance
is ready for operation (“stand-by”). The
temperature level LEDs do not light then while
all other indicators remain active.
!
WARNING! The use of unshielded
flames is prohibited in petrol station
environments.
Should the refuelling stop last longer than 15
minutes, the refrigerator has to be switched
off or switched over to another energy type.
Additional features (MES / AES)
• The brightness of the display reduces after a
few seconds if no other buttons are pressed.
The indicator lights again if a button is
pressed. Press the button again to activate
the required function.
• Failures are indicated by flashing of the failure
indicator LED.
• Should the door be kept open for too long
(more than 2 minutes), an acoustic signal is
initiated (pulsing whistle tone).
• Should the electronic control detect any
failure, an acoustic signal will sound (pulsing
whistle tone). At the same time the display
starts flashing (for trouble-shooting, please
refer to page 142).
Gas operation with internal batteries
(optional)
An optional battery compartment in the
electronics case for internal (self-contained)
power supply of the electronics is available
for the model variants RM 8xx1 and RM 8xx5
(appliances with electronics).