manualshive.com logo in svg

Swegon BlueBox WESTERN Mu Echos A, Инструкция по установке, эксплуатации и обслуживанию


Поделиться
Скачать
background image

25

We reserve the right to make changes without any prior notice.

Translation from original instructions

5 

PRODUCT DESCRIPTION

5.1  Intended use

These units are intended for cooling (unit in cooling only version) or for cooling/heating (heat pump version) of heat-carrying 

fluid; they are generally used in applications in the air-conditioning and refrigeration field.
Their use is recommended within the operating limits indicated in the Technical Catalogue.
Use outside the operating limits stated in the Technical Catalogue will cause the unit to stop.

5.2  Unintended use

The unit must not be used:

 - in an explosive atmosphere;
 - in a flammable atmosphere;
 - in extremely dusty environments;
 - in an environment that is not compatible with the stated IP protection rating;
 - by untrained personnel;
 - in a way that does not comply with the regulations in force;
 - with incorrect installation;
 - with power supply defects;
 - with total or partial failure to comply with the instructions;
 - with lack of maintenance and/or use of non-original spare parts;
 - with inefficient safety components.
 - with modifications or other work not authorised by the Manufacturer.

Содержание BlueBox WESTERN Mu Echos A

































































Отзывы:

Нет отзывов

Похожие инструкции для BlueBox WESTERN Mu Echos A

Yardbeast 3514 User Manual preview
3514
Бренд: Yardbeast Страницы: 32
FHM FH-DW30 Operation And Parts Manual preview
FH-DW30
Бренд: FHM Страницы: 38
Cole Parmer 12911-00 Installation, Operation, Basic Maintenance preview
12911-00
Бренд: Cole Parmer Страницы: 48
York YCAL0014 User Manual preview
YCAL0014
Бренд: York Страницы: 104
Trane HORIZON ABDA Manual preview
HORIZON ABDA
Бренд: Trane Страницы: 92
AEC GPWC70 Operating Instructions Manual preview
GPWC70
Бренд: AEC Страницы: 20
APV Vario Harrow VS 1200 M1 Operating Manual preview
Vario Harrow VS 1200 M1
Бренд: APV Страницы: 36
Echo 74500 Brochure & Specs preview
74500
Бренд: Echo Страницы: 1
Fulgor Milano 45 COMBISET BLAST CHILLER Instructions For Installation And Use Manual preview
45 COMBISET BLAST CHILLER
Бренд: Fulgor Milano Страницы: 192
Nemox Freezy 5 Instructions For The Use And Maintenance preview
Freezy 5
Бренд: Nemox Страницы: 33
LS SA075 Manual preview
SA075
Бренд: LS Страницы: 36
Toro 321000001 Manual preview
321000001
Бренд: Toro Страницы: 80
Yard-Man 769-01534 Operator'S Manual preview
769-01534
Бренд: Yard-Man Страницы: 64
Troy-Bilt Pro Line 665B Operator'S Manual preview
Pro Line 665B
Бренд: Troy-Bilt Страницы: 36
Daikin VRV 5 BS4A14AJV1B Manual preview
VRV 5 BS4A14AJV1B
Бренд: Daikin Страницы: 116
York YR Owner'S Manual preview
YR
Бренд: York Страницы: 40
Rato RG3.6-100Q-Z-II Owner'S Manual preview
RG3.6-100Q-Z-II
Бренд: Rato Страницы: 48
Accorroni ACFR MICRO E 100H Manual preview
ACFR MICRO E 100H
Бренд: Accorroni Страницы: 36

Бренды по названию

Популярные бренды

Загрузить еще бренды