swaploader SL-212, Руководство по эксплуатации и частям

Страница: 57 / 88

Section IV: Maintenance
4.0.MAI.SL-212
MAINTENANCE INSTRUCTIONS
WEEKLY SERVICE
(50 OPERATIONS)
1. Lubricate with grease (refer to lubrication diagram).

Lifting hook on jib (if operating the adjustable jib be sure to
rotate and grease hook).
 Jib slide - top, bottom, and side guides.
2. Check hydraulic oil level. with the hoist in the transport position (lift
cylinders retracted and jib
cylinder extended – see
diagram on front cover) the
oil level in the tank should
read approximately one
inch below the top of the
glass sight on the
temperature/sight gauge
(see diagram ).
3.
Check hydraulic hose and
fittings for leaks. Also check hydraulic hose for wear. Repair
and/or retighten as necessary.
MONTHLY SERVICE
(200 OPERATIONS)
1. Lubricate with grease (refer to lubrication diagram)

Fittings on lift cylinders (quantity: 4).

Front pins on rear pivot joint weldment (quantity: 2).
 Fittings on rear pivot pins and rollers (quantity: 4).
2. Check all bolts and retighten as required.
3. Check adjustments on mast lock (safety latch) mechanism. Refer
to the Mast Lock Inspection & Adjustment Instructions on page 4-4
of the Maintenance Section.
4. Check adjustments on the jib lockout valve. Refer to the Jib
Lockout Valve Inspection & Adjustment Instructions on page 4-5 of
the Maintenance Section.
YEARLY SERVICE
1. Check for proper gapping on outer tube clamp assembly. Refer to
the Outer Tube Clamp Inspection & Adjustment Instructions on
page 4-9 of the maintenance section.
2. Change hydraulic oil, replace hydraulic filter element, and wash out
suction strainer.
3. Check main relief valve setting. Refer to the Pressure Check
Instructions on page 4-7 of the maintenance section (pressure
should be 3,250 psi minimum).
4-1