Swann AMI Deltacon Power, Руководство оператора

Страница: 57 / 86

A-96.250.451 / 190121
AMI Deltacon Power
Program Overview
57
Cond. 2 (cc) Alarm High
5.3.1.1.2* Alarm Low
Hysteresis *
Delay
Sample Temp. Temp. 1 Alarm High
5.3.1.2* 5.3.1.2.1* Alarm Low
Temp. 2 Alarm High
5.3.1.2.2* Alarm Low
Sample Flow Flow Alarm 5.3.1.3.1*
5.3.1.3* Alarm High 5.3.1.3.2
Alarm Low 5.3.1.3.35
Case Temp. Alarm High 5.3.1.4.1*
5.3.1.4* Alarm low 5.3.1.4.2*
Relay 1/2 Function 5.3.2.1/ 5.3.3.1*
5.3.2/5.3.3* Parameter 5.3.2.20/ 5.3.3.20*
Setpoint 5.3.2.300 / 5.3.3.301*
Hysteresis 5.3.2.400/ 5.3.3.401*
Delay 5.3.2.50/ 5.3.3.50*
Input Active 5.3.4.1*
5.3.4* Signal Outputs 5.3.4.2*
Output/Control 5.3.4.3*
Fault 5.3.4.4*
Delay 5.3.4.5*
Miscellaneous Language 5.4.1*
5.4* Set defaults 5.4.2*
Load Firmware 5.4.3*
Password Messages 5.4.4.1*
5.4.4* Maintenance 5.4.4.2*
Operation 5.4.4.3*
Installation 5.4.4.4*
Sample ID 5.4.5*
Line break detection 5.4.6*
Interface Protocol 5.5.1* (only with RS485
5.5* Device Address 5.5.21* interface)
Baud Rate 5.5.31*
Parity 5.5.41* * Menu numbers