SVS-Vistek svs1020 Скачать руководство пользователя страница 47

Страница: 47 / 87

Users Manual – svs4021, svs2020,svs2050, svs2051, svs1020, svs1050, svs285, svs340, svs625

p. 47

Last Update 20.07.2009

12.8 Environmental Issues

4.8.1 Europe

The camera is CE tested and the rules of EN 50022-2 apply.

4.8.2 USA and Canada

I. Labeling requirements:

This device complies with part 15 of the FCC Rules. Operation is subject to the

following two conditions: (1) This device may not cause harmful interference,
and (2) this device must accept any interference received, including

interference that may cause undesired operation.

II. Information to the user:

Note: This equipment has been tested and found to comply with the limits for a
Class A digital device, pursuant to part 15 of the FCC Rules. These limits are

designed to provide reasonable protection against harmful interference when
the equipment is operated in a commercial environment. This equipment

generates, uses, and can radiate radio frequency energy and, if not installed

and used in accordance with the instruction manual, may cause harmful
interference to radio communications. Operation of this equipment in a

residential area is likely to cause harmful interference in which case the user
will be required to correct the interference at his own expense.

Camera complies with FCC Form 47 Rules.

It is necessary to use a shielded power supply cable. You can than use the

“shield contact” on the connector which has GND contact to the camera
housing. This is essential for any use. If not done and camera is destroyed due

to Radio Magnetic Interference (RMI)

WARRANTY is void



Operating temperature Spec: -10 - +40 °C

In order to keep dark current low. To achieve 9 optical Bit, operation at
25 °C max. is recommended.



Power:

US/UK and European line adapter can be delivered.

Otherwise use +12V DC with filtered and stabilized power supply.



Shock is tested

: About 30 g in 6 ms.

Vibration test

is 10 g in 6 ms



RoHS:

All cameras comply with the recommendation of the European Union

concerning RoHS Rules.

Содержание svs1020
























































































Результаты поиска

Содержание svs1020

Отзывы:

Похожие инструкции для svs1020

Бренды по названию

Популярные бренды

SVS-Vistek svs1020, Руководство пользователя

Результаты поиска

Содержание svs1020

Отзывы:

Похожие инструкции для svs1020

Бренды по названию

Популярные бренды