SVS-Vistek svs1020 Скачать руководство пользователя страница 86 | Manualshive

Страница: 86 / 87

background image

Users Manual – svs4021, svs2020,svs2050, svs2051, svs1020, svs1050, svs285, svs340, svs625

p. 86

Last Update 20.07.2009

malfunctions. In that case, take preventive measures on the

electromagnetic-wave generating source so that the system

components do not receive the interference by the
electromagnetic- wave. Take extra precautions against

electromagnetic-wave-interference if the system components are
used with a servomotor, inverter, or other electromagnetic-wave-

generating equipment.
Avoid giving a strong shock against the system components. If

your system components are used in the system where the

connector are subjected to strong repetitive shocks, the
connector are possible to break down. If you intend to use your

system components in such a situation, make sure to use an
optional-connector-fixing-hardware to connect the connector-plug

to the system components body.
When the system components are not in use, put a lens or a

lens-cap onto the cam head so that the image pickup plane of

CCD is protected from dust, foreign object, or other flaw-causing
object. If the glass plane (image pickup plane) gets dirty, clean it

with a cotton swab. When it needs to be cleaned with a cleaner,
be sure NOT to use any organic solvent other than ethyl alcohol.

Do not clean the other system components. In such a case call us

or the dealer/distributor from which you purchased the system
components for cleaning or cleaning instructions.

As a countermeasure against condensation, when the system
components are moved from a warm place to a cold place, take

appropriate precautions to prevent condensation from forming on

the system components.
Do not pull strongly the any cable nor swing it. The stress from

pulling or swinging may cause damage in the coating of the
cable, or breaks in the inside wires.
Avoid short-circuiting its signal output. Otherwise, the system
components might be damaged.
If too much amount of light, (= the incoming light amount of 100

times or greater in comparison with standard light) enters CCD
image pickup plane, video output might not be obtained. In such

a case, take measures to reduce the amount of incoming light.
Do NOT expose the camera to intensive light (sunlight, etc.) to

prevent its inner CCD from getting damaged.
When mounting a lens, take extra caution so that the lens is not

tilled, nor does flaw exist at the lens-mount-screw part. Also check
to confirm that neither dirt nor other foreign object is put inside.

Improper mounting might cause the parts to become locked.

DANGER

Do NOT use any optional unit other than manufacturer-supplied
one. We disclaim any responsibility for damages or losses

incurred by user due to the use of unauthorized / unofficial option
units supplied by a third party

«
...
84
85
86
87
»

Содержание svs1020
























































































Отзывы:

Нет отзывов

Похожие инструкции для svs1020

540EZ - Speedlite - Hot-shoe clip-on Flash

Бренд: Canon Страницы: 4

Бренд: ViewSonic Страницы: 1

Бренд: Kompernass Страницы: 12

Бренд: Leica Страницы: 337

Бренд: emmeti Страницы: 7

Бренд: Tamron Страницы: 8

Бренд: BML Страницы: 42

Бренд: Neoline Страницы: 19

Бренд: IBASE Technology Страницы: 50

Бренд: IDEAL Страницы: 23

Бренд: Axis Страницы: 98

XF10-24mmF4 R OIS

Бренд: FujiFilm Страницы: 136

Бренд: Mercury Страницы: 35

Бренд: Prestigio Страницы: 9

Бренд: Pentax Страницы: 48

Бренд: Elmo Страницы: 52

Бренд: Radio Shack Страницы: 2

Бренд: Hama Страницы: 26

Бренды по названию

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Популярные бренды

Загрузить еще бренды