SVS-Vistek evo1050 Скачать руководство пользователя страница 87

Страница: 87 / 88

Users Manual Area Scan Cameras SVSGigE

Page 87

Users Manual –evo1050, evo2050, evo2150, evo4050, evo4070, evo8050 and evo12040

tem power cables from the system components connectors. After that,

for repair service/technical advice.

Do NOT disassemble the system components.

Do NOT attempt to pull apart; repair, or modify the system components

on your own. To do so leads to a fire or an electric shock accident. Contact

us or the dealer/distributor from which you purchased the camera for re-

pair/modification.

Do NOT supply any power than specified.

The system components are designed to work only under specified volt-

age. Do NOT attempt to drive the system components with the power oth-

er than specified. Operating the system components under power other

than specified invites a fire or a electric shock hazard.

Do NOT use the system components in a high-humidity environment.

Do NOT place the system components near a humidifier, or in other high-

humidity environment. To do so may cause a fire or an electric shock acci-

dent.

CAUTION

If the system components are operated in the electromagnetic field, there

may be cases where noises (vertical, horizontal, or oblique stripes) may

appear to a video output or causes other malfunctions. In that case, take

preventive measures on the electromagnetic-wave generating source so

that the system components do not receive the interference by the elec-

tromagnetic- wave. Take extra precautions against electromagnetic-wave-

interference if the system components are used with a servomotor, invert-

er, or other electromagnetic-wave- generating equipment.

Avoid giving a strong shock against the system components. If your sys-

tem components are used in the system where the connector are subject-

ed to strong repetitive shocks, the connector are possible to break down.

If you intend to use your system components in such a situation, make

sure to use an optional-connector-fixing-hardware to connect the connect-

or-plug to the system components body.

When the system components are not in use, put a lens or a lens-cap onto

the cam head so that the image pickup plane of CCD is protected from

dust, foreign object, or other flaw-causing object. If the glass plane (im-

age pickup plane) gets dirty, clean it with a cotton swab. When it needs to

be cleaned with a cleaner, be sure NOT to use any organic solvent other

than ethyl alcohol. Do not clean the other system components. In such a

case call us or the dealer/distributor from which you purchased the system

components for cleaning or cleaning instructions.

As a countermeasure against condensation, when the system components

are moved from a warm place to a cold place, take appropriate precau-

tions to prevent condensation from forming on the system components.

Do not pull strongly the any cable nor swing it. The stress from pulling or

swinging may cause damage in the coating of the cable, or breaks in the

inside wires.

Avoid short-circuiting its signal output. Otherwise, the system components

might be damaged.

If too much amount of light, (= the incoming light amount of 100 times or

greater in comparison with standard light) enters CCD image pickup plane,

video output might not be obtained. In such a case, take measures to re-

duce the amount of incoming light.

Содержание evo1050

























































































Результаты поиска

Содержание evo1050

Отзывы:

Бренды по названию

Популярные бренды

SVS-Vistek evo1050, Руководство пользователя

Результаты поиска

Содержание evo1050

Отзывы:

Бренды по названию

Популярные бренды