SVS-Vistek evo1050 Скачать руководство пользователя страница 7

Страница: 7 / 88

Users Manual Area Scan Cameras SVSGigE

Page 7

Users Manual –evo1050, evo2050, evo2150, evo4050, evo4070, evo8050 and evo12040

2.3

Connector for standard evo

For Standard ( NOT IP 67) models:

HR10A-10P-12PB (mating connector HR10A-10R-12S)

See outline and notes in chapter 13.2

1 VIN- (GND)

2 VIN+ (10 to 25VDC)

3 RXD data to camera (RS232 Level)

4 TXD data from camera (RS232 Level)

5 IN1 (0 -24 V) Trigger Default

6 IN2 (0 -24 V )

7 OUT1 (open drain, max 24 V, 03A) Strobe

Default

8 OUT2 (open drain, max 24 V, 03A)

9 IN3+, (RS422 Level)

10 IN3- (RS422 Level)

11 OUT3+ (RS422 Level)

12 OUT3- (RS422 Level)

2.4

10A “Ethernet” Connector

RJ 45 “Western” Connector complies with Autosensing 10/100 T Ethernet and Gigabit

specification. Features Auto MDIX.

2.5

Installation/Getting started

Recommended PC

It is recommended to use a PC with a

Quad core CPUs.

For svs8050 and higher

with minimum of 4 Gbyte RAM.

The camera is working also on lower frequen-

cies but it might not deliver the full framerate in those cases.

NETWORK switches are currently NOT supported with dual GigE cameras.

Also MULTICAST operation will not work.

In case only one output is used:

If the camera is connected to the PC directly without using a network switch,

a fixed

IP-Address and Subnet-Mask has to be configured in the PC’s TCP/IP set-

tings:

See: Start->Settings->Network connections->LAN-connection->Properties->TCP/IP

If 2 ports are connected: The IP address must be configured
following the STATIC LINK AGREGATION (SLA) standard. If
not done, performance is reduced. See Appendix

A Gigabit Ethernet network adapter is needed. If your PC does not have a Gigabit in-

terface card purchase a card

using an original INTEL(TM) Chip set.

Currently PCI(e) (EXPRESS) bus cards with 82546 chip set version

Содержание evo1050

























































































Результаты поиска

Содержание evo1050

Отзывы:

SVS-Vistek evo1050, Руководство пользователя, Страница: 7 / 88

Результаты поиска

Содержание evo1050

Отзывы: