SVS-Vistek evo1050 Скачать руководство пользователя страница 60

Страница: 60 / 88

Users Manual Area Scan Cameras SVSGigE

Page 60

Users Manual –evo1050, evo2050, evo2150, evo4050, evo4070, evo8050 and evo12040

13.3.1

Comments on camera temperature

There is no need to worry because camera has been tested at higher temperature

than specified (40 C°).

13.4

Comments on COLOR Version

If you have purchased a COLOR version (e.g. evoZZZCFLGEC) of this camera, please

note the following:

In all electrical terms the camera is identical to the black and white versions.

The camera uses a CCD which has a color mosaic filter. This filter is called “Bayer” fil-

ter named after the person who invented it. It has a pattern on the lines which alter-

nates as follows:

E.g.: First line: RGRGRG ... and so on. (R = RED, B = BLUE, G = GREEN)

Second line: GBGBGB ... and so on.

Please note that about half of the pixels are green, a quarter red and a quarter blue.

This is due to the maximum sensitivity of the human eye at about 550 nm (green).

Note that the green pixel in the “red” line has different sensitivity than the

green pixel in the “blue” line.

Because this camera is a single chip camera it is necessary to use an algorithm which

interpolates those colors which are “not known” by the specific pixel. E.g. the red pixel

does not know its green and blue components.

This means that the performance of the image depends on the software used.

Please be aware that it is not possible to incorporate the algorithm into the camera so

easily. Unlike NTSC/PAL cameras there is no hardware chip available which can do

that for such large images. The user has the advantage to alter the colors depending

on his needs. Thus the color image must be processed in the PC.

We offer several algorithms in the SVCapture program which influence display rate

and image quality. However a color source code is available on request for those who

want to write an application.

We offer a complete set for a system setup containing camera, cable, power supply,

and software to help solving your applications.

Note that you can disable the color in the SVCapture program. Color pro-

cessing is not done inside the camera but in the PC. So some CPU power is

consumed.

If you have questions do not hesitate to contact us or your local dealer.

Содержание evo1050

























































































Результаты поиска

Содержание evo1050

Отзывы:

SVS-Vistek evo1050, Руководство пользователя, Страница: 60 / 88

Результаты поиска

Содержание evo1050

Отзывы: