SVS-Vistek evo1050 Скачать руководство пользователя страница 86

Страница: 86 / 88

Users Manual Area Scan Cameras SVSGigE

Page 86

Users Manual –evo1050, evo2050, evo2150, evo4050, evo4070, evo8050 and evo12040

20.1

Safety Instructions

• This section contains important information for the operator (user) and/or people around

him/her to avoid personal injuries, or property damages against him/her or people around

him/her by using this product correctly.

• Prior to use, read this section carefully to fully understand its instructions for correct use.

Definition of markings

The meaning of each mark used in this instruction manual is given below

DANGER This mark warns the user that improper use, indicated with this mark,

may cause death or severe personal injuries against the user or people

around him/her.

CAUTION This mark warns the user that improper use, indicated with this mark,

may cause personal injuries (*1) or material damages (*2) against the

user or people around him/her.

Notes

*1: Personal injuries mean wounds, burns, electric shocks, and others for which the per-

son injured need neither to be hospitalized nor to be cared for the long term.

*2: Material damages mean any direct or consequential damages related to property or

material loss.

This mark indicates what the user SHOULD NOT DO. The details of things,

which the user should not do, are described next to this mark.

This mark indicates what the user MUST DO. The details of things,

which the user must do, are described next to this mark.

This mark indicates that the user must be alert against a possible DAN-

GER. The details of the DANGER, which the user must be aware of are

described next to this mark.

This mark indicates that the user is given a CAUTION against possible

hazards. The details of the CAUTION, which the user must be aware of,

are described next to this mark.

Handling Precautions

DANGER

If any overheating sign is observed, discontinue the use immediately.

In the event that smoke, smell, or any other overheating sign is observed,

turn the power switch of the system OFF immediately and remove the

power cable(s) from the system connectors, like computer, camera, light-

ning. Do NOT try to continue to use the system. To do so in spite of clear

signs of malfunction invites a fire, an electric shock hazard, or a serious

damage to the system components. In such case, contact for repair ser-

vice us or our dealer/distributor, from which you purchased the system.

If any malfunctioning sign is observed, discontinue the use immediately.

Do NOT try to use the system when it is malfunctioning. (Ex. No images

on the monitor) In the event of malfunction, turn the power switch of the

system OFF immediately and remove the system power cables from the

system components connectors. In such case, contact for repair service us

or our dealer/distributor from which you purchased the system.

If any foreign object gets into the system components, discontinue the

use immediately.

In the event that liquids, small particles, or any other foreign objects get

into the system components, do NOT try to continue to use the system. To

do so invites a fire or an electric shock hazard. In that case, turn the pow-

er switch of the system components OFF immediately and remove the sys-

Содержание evo1050

























































































Результаты поиска

Содержание evo1050

Отзывы:

Бренды по названию

Популярные бренды

SVS-Vistek evo1050, Руководство пользователя

Результаты поиска

Содержание evo1050

Отзывы:

Бренды по названию

Популярные бренды