SVS-Vistek eco1050 Скачать руководство пользователя страница 53 | Manualshive

Страница: 53 / 80

SVS-Vistek eco1050 Скачать руководство пользователя страница 53

Users Manual – eco1050, eco2050, eco2150, eco4050, eco674, eco694, eco814

p. 53

12.5

Environmental Issues

4.8.1 Europe
The camera is CE tested and the rules of EN 50022-2 apply.

4.8.2 USA and Canada
I. Labeling requirements:
This device complies with part 15 of the FCC Rules. Operation is subject to the
following two conditions: (1) This device may not cause harmful interference,
and (2) this device must accept any interference received, including
interference that may cause undesired operation.

II. Information to the user:
Note: This equipment has been tested and found to comply with the limits for
a Class A digital device, pursuant to part 15 of the FCC Rules. These limits are
designed to provide reasonable protection against harmful interference when
the equipment is operated in a commercial environment. This equipment
generates, uses, and can radiate radio frequency energy and, if not installed
and used in accordance with the instruction manual, may cause harmful
interference to radio communications. Operation of this equipment in a
residential area is likely to cause harmful interference in which case the user
will be required to correct the interference at his own expense.

It is necessary to use a shielded power supply cable. You can than use the
“shield contact” on the connector which has GND contact to the camera
housing. This is essential for any use. If not done and camera is destroyed due
to Radio Magnetic Interference (RMI) WARRANTY is void!



Operating temperature Spec: -10 to +40 °C
In order to keep dark current low. To achieve 9 optical Bit, operation
at 25 °C max. is recommended.



Power: US/UK and European line adapter can be delivered.
Otherwise use +10 to +25V DC with filtered and stabilized power
supply.



Shock is tested: About 60 g in 6 ms. Vibration test is 10 g in 6 ms



RoHS: All cameras comply with the recommendation of the European
Union concerning RoHS Rules.

«
...
51
52
53
54
55
...
»

Содержание eco1050

















































































Отзывы:

Нет отзывов