Suzuki NEXA BALENO, Инструкция по эксплуатации и сервисная книжка

Страница: 409 / 422

11-8
APPEARANCE CARE
55TH0-74E
Leather Upholstery
Remove loose dirt with a vacuum cleaner.
Using a mild soap or saddle soap solution,
wipe dirt off with a clean damp soft cloth.
To remove soap, wipe the areas again with
a soft cloth dampened with water. Wipe the
areas dry with a soft dry cloth. Repeat this
until the dirt or stain is removed, or use a
commercial leather cleaner for tougher dirt
or stains. If you use a leather cleaner,
carefully follow the manufacturer’s instruc-
tions and precautions. Do not use solvent
type cleaners or abrasive cleaners.
NOTE:
• In order to keep the leather upholstery
looking good, it should be cleaned at
least twice a year.
• If the leather upholstery becomes wet,
immediately wipe it dry with a tissue
paper or a soft cloth. Water may cause
the leather to harden and shrink if it is
not wiped off.
• When parking on sunny days, select a
shady place or use a sunshade. If the
leather upholstery is exposed to the
direct sunlight for a long time, it may dis-
color and shrink.
• As is common with natural materials,
leather is inherently irregular in grain and
cowhide has spots in its natural state.
These do not affect the performance of
the leather in any way.
Seat Belts
Clean seat belts with mild soap and water.
Do not use bleach or dye on the belts.
They may weaken the fabric of the belts.
Vinyl Floor Mats
Ordinary dirt can be removed from vinyl
with water or the mild soap. Use a brush to
help loosen dirt. After the dirt is loosened,
rinse the mat thoroughly with water and
dry it in the shade.
Carpets
Remove the dirt and soil as much as possi-
ble with a vacuum cleaner. Using a mild
soap solution, rub stained areas with a
clean damp cloth. To remove soap, rub the
areas again with a cloth dampened with
water. Repeat this until the stain is
removed, or use a commercial carpet
cleaner for tougher stains. If you use a car-
pet cleaner, carefully follow the manufac-
turer’s instructions and precautions.
Instrument Panel and Console
Remove loose dirt with a vacuum cleaner.
Gently wipe dirt off with a tightly squeezed
damp clean cloth. Repeat this until the dirt
is removed.
68PM09004
NOTICE
Do not use chemical products that
contain silicon to wipe electrical
components such as the air condi-
tioning system, audio, navigation
system, or other switches. These will
cause damage to the components.
Do not spray water or any liquid
directly on instrument cluster or any
other electrical or electronic compo-
nents. This may cause damage and/
or lead to non-functioning of the part.