Suzuki NEXA BALENO, Инструкция по эксплуатации и сервисная книжка

Страница: 233 / 422

5-48
OPERATING YOUR VEHICLE
55TH0-74E
• When the head-up display gets hot, such
as after parking the vehicle under the
blazing sun, the displayed information
may temporarily become dark for its pro-
tection. When the head-up display gets
hotter, the displayed information will
temporarily disappear and the message
will be shown on the information display
of the instrument cluster.
– When the temperature becomes low,
the above condition will be canceled.
However, if the above condition is
kept, ask a Maruti Suzuki authorised
workshop.
– You can turn off the message on the
information display in high tempera-
ture by changing the setting (customi-
zation). For details, refer to "Setting
Mode" in "INSTRUMENT CLUSTER"
section.
Activation of the head-up display
When you press the engine switch to ON
mode and the engine starts, the head-up
display will automatically appear and the
following information will be displayed as
necessary.
55T050750
(1) Vehicle speed
(2) Standard display
(3) Gear position indicator (for Auto Gear
shift vehicles) (if equipped)
(4) Clock
(5) Cruise indicator (if equipped)
(6) “SET” indicator (if equipped)
When you press the engine switch to ACC
or LOCK (OFF) mode, the head-up display
will be automatically stored.
NOTE:
• Even if you stop the engine, the display
setting will be stored.
• The vehicle speed on the head-up dis-
play and the one on the speedometer
may differ a little.
• You can turn off a part of the information
by changing the setting (customization).
Operation of the head-up display
Operate the head-up display while the
vehicle is stopped. You cannot adjust the
brightness and the displayed position while
driving.
Head-up display operation switch
55T050310
(1) Down switch
(2) Up switch
(3) Brightness control switch
(4) HUD (Head-up display) switch
(1)
(3) (5) (6)
(2)
(4)
(3) (2) (4) (1)
HUD