Suzuki NEXA BALENO, Инструкция по эксплуатации и сервисная книжка

Страница: 124 / 422

3-23
BEFORE DRIVING
55TH0-74E
NOTE:
• Avoid covering the light sensor area of
the windshield with a sticker. The sticker
may impair the performance of the sen-
sor and make the system unable to con-
trol operation of the lights correctly.
• If you turned the ignition switch to “ON”
position or changed the ignition mode to
ON by pressing the engine switch and
“AUTO” position remains selected, the
headlights and position lights come on
automatically as it gets dark outside,
even with the engine not running. Leav-
ing the lights lit for a long time may lead
to a completely discharged battery.
(3)
Front position lights, tail lights, license
plate light and instrument lights are on, but
headlights are off.
(4)
Front position lights, tail lights, license
plate light, instrument lights and headlights
are on.
55T030100
With the headlights on, push the lever for-
ward to switch to the high beams (main
beams) and pull the lever toward you to
switch to the low beams. When the high
beams (main beams) are on, a light on the
instrument cluster will come on. To
momentarily activate the high beams (main
beams) as a passing signal, pull the lever
slightly toward you and release it when you
have completed the signal.
Auto-on headlight system
55T030190
The auto-on headlight system automati-
cally turns on all lights that are operated by
the lighting switch, when the following
three conditions are all met.
Conditions for auto-on headlight system
operation:
1) It is dark around the light sensor (5).
2) The lighting switch is in “AUTO” posi-
tion.
3) You turn the ignition switch to “ON”
position or press the engine switch to
change the ignition mode to ON.
This system is activated by a signal from
the light sensor (5) on the passenger side
of instrument panel. Do not cover the sen-
sor (5). Otherwise, the system will not work
correctly.
（
5
）