Suzuki NEXA BALENO, Инструкция по эксплуатации и сервисная книжка

Страница: 144 / 422

4-11
INSTRUMENT CLUSTER
55TH0-74E
NOTE:
Depending on vehicle’s specifications,
some items may not be displayed.
How to use the setting mode:
1) When the ignition switch is in “ON”
position or the ignition mode is ON, and
the vehicle is stationary.
2) Push and hold the indicator selector
knob (2) until the display shows
“ ”.
3) Turn and/or push the indicator selector
knob (2) to select a function that you
want to set up according to the chart in
the previous page.
4) Turn and/or push the indicator selector
knob (2) to register settings of the fol-
lowing functions.
68PM00272
NOTE:
• As shown in the above illustration, “ ”
indicates on the display of currently set-
ting item.
• To go back to the higher level display
during operation, turn the indicator
selector knob (2) to display “ ” or
“ ” and then push the indicator
selector knob (2).
Time indication of clock “ ”
• : 12-hour format (default set-
ting)
• : 24-hour format
Central door locking system “ ”
• : Unlock all doors by turning
the key once
• : Unlock all doors by turning
the key twice (default setting)
Automatic door locking function “ ”
• : Disable the automatic door
locking function
• : Lock all doors when the vehi-
cle speed reaches 15 km/h
(default setting)
Automatic door unlocking function “ ”
• : Disable the automatic door
unlocking function
• : Unlock all doors when the key
is pulled out from the ignition
switch (default setting)
Door locking and unlocking siren “ ”
• : Siren sounds when the doors
(including the tailgate) are
locked or unlocked by using
the keyless entry system
transmitter (default setting)
• : Siren does not sound when
the doors (including the tail-
gate) are locked or unlocked
by using the keyless entry
system transmitter
Additional flashes of the turn signal
“ ”
• : Turn signal flashes three
times after the turn signal
lever is returned (default set-
ting)
• : Disable the additional flashes
of turn signal
Shock sensor “ ”
• : Enable the shock sensor
• : Disable the shock sensor
(default setting)
Pre-warning sensitivity of
the shock sensor “ ”
• : Disable the pre-warning
• to :
Adjust the pre-warning sensi-
tivity of shock sensor (Lowest
sensitivity level is L01 and
highest is L15, and default
setting is L14)
Turn the indicator selector knob
(2).
Push the indicator selector
knob (2).