Suzuki NEXA BALENO, Инструкция по эксплуатации и сервисная книжка

Страница: 123 / 422

3-22
BEFORE DRIVING
55TH0-74E
Your vehicle’s lighting system is controlled by two main systems: the lighting switch and
the auto-on headlight system (when the lighting switch is in “AUTO” position).
The two systems work together to operate your lights as shown in the following chart:
ON: Lights ON
LIGHT: When it is light around the light sensor (5).
DARK: When it is dark around the light sensor (5).
Lighting
switch
position
Main lights to
be operated
Ignition switch in the
“LOCK” or “ACC” position /
Ignition mode
LOCK (OFF) or ACC
Ignition switch in the
“ON” position /
Ignition mode ON
LIGHT DARK LIGHT DARK
(1) OFF
Position lights,
Tail lights
– – – –
Headlights – – – –
(2) AUTO
(if
equipped)
Position lights,
Tail lights
– – – ON
Headlights – – – ON
(3)
Position lights,
Tail lights
ON ON ON ON
Headlights – – – –
(4)
Position lights,
Tail lights
ON ON ON ON
Headlights ON ON ON ON
To turn the lights on or off, twist the knob
on the end of the lever. There are four
positions:
OFF (1)
All lights are off.
AUTO (2) (if equipped)
This function works when the ignition
switch is turned to “ON” position or the
engine switch is pressed to change the
ignition mode to ON. The headlights and
position lights are turned on and off auto-
matically according to the amount of out-
side light detected by a sensor. They go
out automatically when you turn the igni-
tion switch to “ACC” or “LOCK” position or
change the ignition mode to ACC or LOCK
(OFF) by pressing the engine switch.
The light sensor (5) for sensing the amount
of outside light is installed on the passen-
ger’s seat side of instrument panel.
CAUTION
If the light sensor area of the wind-
shield is covered with mud, ice, or
other similar substances, the head-
lights and position lights may be
turned on even when it is still light
outside.