Suzuki NEXA BALENO, Инструкция по эксплуатации и сервисная книжка

Страница: 209 / 422

5-24
OPERATING YOUR VEHICLE
55TH0-74E
Clutch operation
You can select either the Drive (D) mode or
the Manual (M) mode or the Reverse (R)
mode. Since this vehicle controls clutch
operation electronically in either mode, you
do not need to operate the clutch.
Creeping function
This vehicle has a creeping function that
helps the vehicle to start smoothly by
engaging the clutch. When the gearshift
lever is in any of the positions “D”, “M” or
“R”, and you release your foot from the
brake pedal, the vehicle starts slowly with-
out depressing the accelerator pedal.
However, creep is not possible in manual
(M) mode with 2nd gear engaged. The
creeping function is disabled if you
depress the brake pedal or pull up the
parking brake lever.
NOTE:
If the driver’s door is opened and/or the
parking brake lever is engaged with the
gear in the “M”, “D” or “R” position, the
creeping function will not operate.
Parking and Stopping the vehicle
Auto Gear Shift does not have a parking
position. Park the vehicle with a gear
engaged. Make sure that the gearshift
lever is “D”, “M”, or “R”.
Also, check the instrument cluster to make
sure that the transaxle is engaged in “1” or
“R” position.
Drive (D) mode
When the Drive (D) mode is activated, the
most appropriate gear position is automati-
cally selected upon operation of the accel-
erator pedal and variation of vehicle
speed.
Normal driving:
1) Start the engine as instructed in “Start-
ing the engine” in this section.
2) With your foot on the brake pedal, shift
the gearshift lever to the “D” position.
When the gearshift lever is shifted to
the “D” position, the gear will be shifted
to 1st.
55RM03009
NOTE:
• If 1st gear cannot be engaged even
though the gearshift lever has been
shifted from the “N” to the “D” position,
the system will re-try shifting automati-
cally. This will take some time, noise
may be heard from the gears, and shift-
ing gear shock may occur. However,
they do not indicate malfunction.
– The “N” indicator will flash, the
depress brake pedal indicator will
come on and a warning buzzer (long
pulse sound) will sound if any of the
following cases occur;
– If you shift the gearshift lever from
the “N” to the “D” position without
depressing the brake pedal
– If the system is unable to re-try shift-
ing You should depress the brake
pedal and shift the gearshift lever to
“N” position, then shift to “D” again.
3) Release the parking brake and brake
pedal.
4) Depress the accelerator pedal slowly.
NOTICE
A buzzer will sound continuously if
the vehicle is operated with the gear-
shift lever in-between of each shift
positions. The vehicle will become
inoperative if you continue to operate
the vehicle with the gearshift lever in
between shift positions.
D