Suzuki NEXA BALENO, Инструкция по эксплуатации и сервисная книжка

Страница: 75 / 422

2-34
FOR SAFE DRIVING
55TH0-74E
2) If your vehicle is equipped with the
reclining mechanism of rear seatback,
adjust the angle of the seatback so that
there is no gap between the child
restraint system and the seatback.
3) Make sure that the child restraint sys-
tem is securely fastened to the main
seat.
4) Make sure to pass the seat belt of the
passenger’s seat through the specified
parts, according to the instruction man-
ual that came with the child restraint
system.
59RN02140
5) Insert the tongue plate (3) firmly into the
seat belt buckle (4) until you hear a
click.
• The child restraint system in the above
figure is a typical example.
72M00172
6) If the child restraint system does not
have a seat belt locking mechanism or
a locking clip, secure it to the seat by
using the aftermarket locking clip.
• The aftermarket locking clip shown in
the above figure is a typical example.
7) Shake the child restraint system back
and forth, and left and right to check if it
is securely in position.
• If you cannot ensure secure positioning,
check the instruction manual that came
with the child restraint system or consult
the authorised workshop where you pur-
chased the seat.
(3)
(4)
WARNING
Failure to securely fasten a child
restraint system via the seat belt
locking mechanism or a locking clip
may cause serious injury to a child
when sudden braking or a collision
occurs.
WARNING
Make sure to position the child
restraint system securely. Failure in
doing so could result in the child sus-
taining serious injury when sudden
braking or a collision occurs.