Suzuki 2005 VL1500K5, Дополнительное руководство по обслуживанию

Страница: 66 / 181

VL1500K5 (’05-MODEL) 65
“C19” (P0615) STARTER RELAY CIRCUIT MALFUNCTION
INSPECTION
Step 1
1) Remove the left frame upper cover.
(
!
VL1500 Service Manual 6-3)
2) Turn the ignition switch OFF.
3) Check the Starter relay coupler for loose or poor contacts.
If OK, then inspection the Starter relay.
(
!
VL1500 Service Manual 7-17)
Is the Starter relay OK?
4) After repairing the trouble, clear the DTC using SDS tool.
(
!
Page 42)
DETECTED CONDITION POSSIBLE CAUSE
Starter relay signal is not input to ECM. • Starter system circuit open or short.
• ECM malfunction.
ECM
Side-stand
relay Ignition
switch Engine stop
switch
STRL
Y/G
O/W
STARTER
MOTOR
STARTER
RELAY
To GP
switch
1
YES
• O/W and Y/G wire open or shorted to ground,
or poor
j
connection.
• If wire and connection are OK, intermittent trou-
ble or faulty ECM.
• Recheck each terminal and wire harness for
open circuit and poor connection.
• Replace the ECM with a known good one, and
inspect it again.
NO Replace the Starter relay with a new one.
ECM coupler (Harness side)
1
SA
MP
LE