Suzuki 2005 VL1500K5, Дополнительное руководство по обслуживанию

Страница: 89 / 181

88 VL1500K5 (’05-MODEL)
7) Remove the left frame upper cover. (
!
VL1500 Service
Manual 6-3) and disconnect the ECM coupler.
8) Check the continuity between W/G wire
A
and terminal
7
.
9) Also, check the continuity between B/Br wire
B
and terminal
D
.
"
HO2S lead wire continuity: Continuity (
,
)
#
09900-25008: Multi-circuit tester set
09900-25009: Needle pointed probe set
-
Tester knob indication: Continuity test (
,
)
Is the continuity OK?
10)After repairing the trouble, clear the DTC using SDS tool.
(
!
Page 42)
Step 2 (When indicating C44/P0130:)
1) Connect the ECM coupler and HO2 sensor coupler.
2) Warm up the engine enough.
3) Measure the HO2 sensor output voltage between W/G wire
and B/Br wire, when idling condition.
"
HO2 sensor output voltage at idle speed:
0.4 V and less (
+
W/G –
-
B/Br)
4) If OK, then pinch the PAIR hose
1
with a proper hose clamp.
5) Measure the HO2 sensor output voltage while holding the
engine speed at 5 000 r/min.
"
HO2 sensor output voltage at 5 000 r/min:
0.6 V and more (
+
W/G –
-
B/Br)
#
09900-25008: Multi-circuit tester set
09900-25009: Needle pointed probe set
*
Tester knob indication: Voltage (
+
)
YES Go to Step 2. (When indicating C44/P0130:)
NO
W/G wire shorted to ground, or W/G or B/Br wire
open.
1
!
ECM coupler (Harness side)
2
V
2
SA
MP
LE