Suzuki 2005 VL1500K5, Дополнительное руководство по обслуживанию

Страница: 109 / 181

108 VL1500K5 (’05-MODEL)
THROTTLE BODY REASSEMBLY
Reassemble the throttle body in the reverse order of disassem-
bly. Pay attention to the following points:
• With the STV fully open, install the STP sensor
1
and tighten
the STP sensor mounting screw to the specified torque.
NOTE:
* Apply thin coat of the engine oil to the new O-ring
.
* Align the secondary throttle shaft end
A
with the groove
B
of
STP sensor.
* Apply SUZUKI SUPER GREASE “A” to the secondary throttle
shaft end
A
if necessary.
(
99000-25030: SUZUKI SUPER GREASE “A” (USA)
99000-25010: SUZUKI SUPER GREASE “A” (Others)
#
09930-11950: Torx wrench
&
STP sensor mounting screw: 3.5 N·m (0.35 kgf-m, 2.5 lb-ft)
NOTE:
* Make sure the STP valve open or close smoothly.
* If the STP sensor adjustment is necessary, refer to page 110
for STP sensor setting procedure.
• With the throttle valve fully closed, install the TP sensor
2
and tighten the TP sensor mounting screw to the specified
torque.
NOTE:
* Apply thin coat of the engine oil to the new O-ring
.
* Align the throttle shaft end
C
with the groove
D
of TP sensor.
* Apply SUZUKI SUPER GREASE “A” to the throttle shaft end
C
if necessary.
(
99000-25030: SUZUKI SUPER GREASE “A” (USA)
99000-25010: SUZUKI SUPER GREASE “A” (Others)
#
09930-11950: Torx wrench
&
TP sensor mounting screw: 3.5 N·m (0.35 kgf-m, 2.5 lb-ft)
NOTE:
* Make sure the throttle valve open or close smoothly.
* TP sensor setting procedure. (
!
Page 36)
SA
MP
LE