Suzuki 2005 VL1500K5, Дополнительное руководство по обслуживанию

Страница: 63 / 181

62 VL1500K5 (’05-MODEL)
EOT SENSOR INSPECTION
• Remove the EOT sensor. (
!
Page 119)
• Check the EOT sensor by testing it at the bench as shown in
the figure. Connect the EOT sensor
1
to a circuit tester and
place it in the oil
2
contained in a pan, which is placed on a
stove.
• Heat the oil to raise its temperature slowly and read the col-
umn thermometer
3
and the ohmmeter.
• If the EOT sensor ohmic value does not change in the propor-
tion indicated, replace it with a new one.
"
EOT sensor specification
#
09900-25008: Multi-circuit tester set
)
Tester knob indication: Resistance (
Ω
)
If the resistance is noted to show infinity or too much different
resistance value, replace the EOT sensor with a new one.
'
Engine Oil Temp Resistance
20 °C (68 °F) Approx. 61.3 k
Ω
50 °C (122 °F) Approx. 17.8 k
Ω
80 °C (176 °F) Approx. 6.2 k
Ω
110 °C (230 °F) Approx. 2.5 k
Ω
* Take special care when handling the EOT sensor. It
may cause damage if it gets a sharp impact.
* Do not contact the EOT sensor and the column ther-
mometer with a pan.
SA
MP
LE