Rev. 2.4
- 31 -
© 2014 Suzo-Happ Group
Bill-to-
Bill™ 300XE
Some models may have plastic push rivets holding the guide assembly instead of screws
as mentioned above. Practice extra care when removing the push rivets as to not damage
them.
The four belts on the opposite side of the rollers should be cleaned using the LCD cleaner. Once
again, do not spray the LCD cleaner directly on the unit. Spray on the anti-static microfiber cloth
instead. The belt can be rotated manually to gain access to the other side of the bet for cleaning.
Also, inspect all the connectors on the chassis and ensure the connectors are neither bent nor
damaged. Report any damaged connectors to a technician in order to replace the part.
Once the maintenance has been completed for the Bill-to-
Bill™ 300XE chassis, re-insert the recycling
cassettes and dispenser, and slide it back into the housing and ensure the locks holding the chassis
inside are locked properly. If the lock does not fully engage, contact a certified technician for further
analysis
