Rev. 2.4
- 56 -
© 2014 Suzo-Happ Group
Bill-to-
Bill™ 300XE
Additionally, once the cover is opened two sets of sensors can be seen, one at the edge of the cover,
and the other at the edge of the recycling cassette. The two sets of sensors have to be cleaned using
a cotton swab and then sprayed with compressed air to remove leftover loose dirt.
Ensure the air is sprayed outward to prevent dirt from being blown into the recycling
cassette itself.
Observe the two sensors located at the edge of the cover and edge of the opening on the
cassette. In order to ensure proper bill detection, ensure the sensors are flushed with the
surface as mentioned before.
