Rev. 2.4
- 50 -
© 2014 Suzo-Happ Group
Bill-to-
Bill™ 300XE
6.1.
Bill Validator (MFLV-9013, MFLV-2110)
Overtime, the Sense-A-
Click™ module has been affected by the ambient temperature fluctuations as
well as humidity and possible smoke filled environment. After several years, due to these factors the
unit can no longer rely on the signal it receives optically and it require either replacement all lenses
and recalibration
(this option is available for
Suzo-Happ Group
™ certified service centers only)
,
or simply be replaced by a new set to ensure a high acceptance rate.
When extracting the lower Sense-A-
Click™ module, in order to avoid damage, the use of the
Sense-A-
Click™ extraction tool is mandatory (OPT-HW-FT01)
First, insert the extractor into the two channels on the two sides of the lower Sense-A-
Click™ module.
The small teeth on the extractor should be pointing away from the bezel. Next, move the extractor
away from the bezel as to flush it with the Sense-A-
Click™ module and put it at 90 degrees to the
surface of the bill validating head.
If manual cleaning and recalibration option is selected, the Sense-A-
Click™ must be
recalibrated as outlined in the Suzo-Happ Group
™ Sensor Maintenance Guidelines
document
(for
Suzo-Happ Group
™ certified service centers only)
