Sutron Xpert2, Руководство по эксплуатации и обслуживанию

Страница: 77 / 336

Bringing the Benefits of Real-Time Data Collection to the World
Sutron Corporation, Tel: 703-406-2800, http://www.sutron.com
67
The properties window for either of these FieldVar blocks looks like this:
Listed are the two modifiable properties for the Measure block. To add Interval to our View Data
tab, check the box next to Interval . Then click on the word Interval to select it and click Label…
to give this property a Public Name. For this example, assign the name “BP Interval”. Public
Name must be unique in the system in order to uniquely identify the referenced property. If no
Public Name is specified, it defaults to Internal Name when OK is pressed, but will display an
error if that name is not unique. To continue this example, click OK and then follow the same
procedure with the other Measure block to assign its interval a
Public Name of “SR Interval”.
Now when we exit the Setup screen and go back to the Data tab, we see the two interval
properties for our measure blocks as shown below:
To change either property, simply select the one to modify and click
Change…
to enter a new
value.