Sutron Xpert2, Руководство по эксплуатации и обслуживанию, Страница: 118 / 336

Bringing the Benefits of Real-Time Data Collection to the World
Sutron Corporation, Tel: 703-406-2800, http://www.sutron.com
108
Use defaults: Check this if you wish to specify custom values for the Redirector service URL or
port number – otherwise the settings for the Sutron Redirector service will be used.
Troubleshooting:
If you are unable to access the Redirector service, check to make sure your user name and
password were specified correctly. If that doesn’t resolve the issue, check with your network
administrator that you have rights to access redirector.sutron.com on port 80. If your
organization blocks non-Web access on port 80, you may also try specifying the URL
redirector.sutron.com and port 23 under Server Settings.
Preparing the Xpert to work with XTerm
The Xpert comes configured at the factory to communicate with XTerm on its COM1 serial port
at 115,200 baud. Connect a standard M-F DB9 cable between the PC and the Xpert. A M-M
gender changer and a Null Modem are necessary to connect Xpert to the PocketPC.
The program in the Xpert responsible for communicating with XTerm is remote.exe. When the
Xpert starts up, it will first check for an autoexec.bat file in the \flash disk folder. If the file is not
there (factory default condition) the system will automatically run remote.exe on com1.
However, if the file is there, the system will execute the contents of autoexec.bat . In this case,
remote.exe is run only if there is a line in the file to run it.
In the event that a system has an autoexec.bat file that does not run remote.exe and you want to
run it, reset the Xpert and hold a stylus on the touch screen while it starts. When your touch is
detected the system will prompt you to see if you desire to bypass the
autoexec.bat . Select YES
and the Xpert will bypass autoexec.bat and run remote.exe on com1.
Operating XTerm
When XTerm runs and communicates with an Xpert that has user accounts setup, you are
required to enter a username and password to gain access. When this happens, simply enter a
valid username and password.
When XTerm starts you will see a dialog similar to the one below. The left portion of the
desktop window shows the contents of the Xpert display. The entire screen of the PocketPC
display shows the Xpert display.
When you click (or tap in the case of the PocketPC) in the Xpert portion of the display, the Xpert
will respond as if you had used the touch screen on the Xpert itself. The only exception to this is
on the PocketPC: when you tap-and-hold the stylus against the screen for a few seconds,
XTerm’s main menu is displayed. The options on this menu are the same as those provided by
the buttons on the right-hand side of the desktop version.