Sutron Xpert2, Руководство по эксплуатации и обслуживанию

Страница: 61 / 336

Bringing the Benefits of Real-Time Data Collection to the World
Sutron Corporation, Tel: 703-406-2800, http://www.sutron.com
51
Antenna
The Antenna property identifies the type of antenna you have connected to Satlink.
Initialize Satlink
The Initialize Satlink check box controls whether or not to send transmission settings to Satlink
at the start of recording. When this box is checked, the transmission settings (times, rates,
channels, etc.) are sent to the Satlink whenever the unit is started, otherwise, settings are not sent
to the Satlink, but assume instead that Satlink has been configured by some other program (e.g.,
Satlink Communicator ).
Self-Timed Dialog
The Self-Timed dialog allows the setting of the Self-Timed transmission properties. The
properties correspond to settings that will be sent to Satlink to configure it as well as settings that
will be used by the Xpert itself to make the transmission. A typical dialog is shown below
followed by a brief explanation of each property.
Enable Self-Timed
This box must be checked for the system to make self-timed transmissions. This field is sent to
the Satlink to configure it and uses the field to control its own scheduling.
Center in Window
This box instructs Satlink to center each timed transmission in the transmission window.
Normally, a transmitter has a transmission window that is larger than the length of the
transmission it must make. When “Center in Window” is selected, Satlink will delay each
transmission so it is centered in the window. The Window size is entered in the Window
Property on this dialog.