Sutron Xpert2, Руководство по эксплуатации и обслуживанию

Страница: 106 / 336

Bringing the Benefits of Real-Time Data Collection to the World
Sutron Corporation, Tel: 703-406-2800, http://www.sutron.com
96
EZSETUP FOR A STREAM GAUGING STATION
Setting up a stream gauging station with a shaft encoder is simple. The following setup will use a
15-minute measurement interval, log the data and transmit it to a GOES satellite.
Connect all equipment before entering the setup. For this example setup, hook a Satlink to COM
2 and a Quadrature shaft encoder to Digital channels 3-4 (terminal B I/O 3 and I/O 4)
Log into the system using the SETUP account access.
Start by setting the station name. This name will identify the station and allow the setup file
name to be unique. Do this from the
MAIN Tab by clicking the three dots next to Station Name:
and typing or clicking the letters on the virtual keyboard. LakeTop is used in this example.
Go to the Setup Tab , this is where the rest of the station configuration will take place.
Select the Satlink tree by clicking on it, then, click the EDIT button.
Set the Satellite ID (NESDIS assigned) and COM port Satlink is connected to, and then click
OK .
If a message saying recording must be turned off appears, click YES, this will stop the system
and let the rest of the setup continue. When it asks to restart recording, click NO. Recording
doesn't need to start until the entire setup is completed.