Sutron Xpert2, Руководство по эксплуатации и обслуживанию

Страница: 40 / 336

Bringing the Benefits of Real-Time Data Collection to the World
Sutron Corporation, Tel: 703-406-2800, http://www.sutron.com
30
By default the voice modem will speak the specified Dial Out message. If the modem is unable
to detect “ring-back” it may start speaking a phrase before someone answers the phone. Because
of this, the message spoken should either be repeated or wait for a button to be pushed before
speaking the alarm data. If a Dial Out message is not defined or the letter “D” is placed at the
beginning of a phone-number then a data alarm will be sent. The data message will try to
automatically detect a PC Base Station and send an SSP message, otherwise a simple text
message is sent and a prompt is made asking for the alarm to be acknowledged.
Above is an example of the speech phrase editor screen. The combo box in the top left is used to
select a speech command (such as “SpeakPhrase”). The combo box in the top middle is used to
select any optional parameters (such as the phrase to speak in this example). The […] button is
used to edit and/or add the command to the command list. [+] is used to move a phrase up in the
list, and [-] is used to move a phrase down. [x] can be used to delete a phrase from the list. The
combo box on the bottom of the screen can be used to select the language for the phrases
displayed, this is used in conjunction with the “Language” command to setup a bilingual speech
phrase.
Speech Dial-in and Dial-Out commands
Command Description
AckAlarms Acknowledges alarms in the system. Further alert transmissions will
cease until a new alert occurs or it’s time for an alarm transmission.
AnswerData Switches to answering the phone in data mode.
Branch Branches to another part of the speech command specified by a user
Label. Searching for the label begins with the first line in the speech
command.
BranchDTMF Waits for and branches based on a DTMF press. Searching for the label
begins at the current line in the speech command. The phone will be
hungup after 60 seconds if a button is not pushed.
BranchNoDTMF Same as Branch, but the Branch is only performed if a DTMF button
was
not pressed on the phone. This is usefull for repeating a series of