Surveon NVR7312(2U), Руководство пользователя

Страница: 167 / 367

167
4. Click the interior of a window to drag it to the desired position.
5. If an object size has not yet been defined, select Define Object and click the
New Region button to create an object box.
6. Click and drag the corners of the object box to define the minimum size of
objects that will be detected.
7. Adjust the sliders: (Settings will be applied to all existing windows)

Interval - Adjusts how much time between each check of the forbidden
area.
8. Click OK to save the changes and exit the popup.
Testing Detection Windows
To test a detection window:
1. Right-click the camera entry in the Camera List below the Live View , then
highlight and click the VI Setup > Forbidden Area > Select Camera option.
2. Click Save Reference Image to have a reference image saved and the system
will use this saved image to compare with the live recording image to see if
there is any different; when the 2 images are different, the alarm will be
triggered.
3. Click the Begin Simulation button enable test detection. During testing a red
border will appear around any objects detected in the forbidden area.
4. Click End Simulation to end the simulation.
5. Click OK to exit the popup.
Deleting a Detection Window
To delete a new detection window:
1. Right-click the camera entry in the Camera List below the Live View , then
highlight and click the VI Setup > Forbidden Area > Select Camera option.
2. Highlight an existing detection window.
3. Click the Clear button to delete the window.
4. Click OK to save the changes and exit the popup.