Supero SuperServer 5014C-M8, Руководство пользователя

Страница: 64 / 110

6-6
S
UPER
S
ERVER 5014C-M8 User's Manual
CD-ROM Drive Installation
The top cover of the chassis must be opened to gain full access to the CD-
ROM drive bay. The 5014C-M8 accomodates only slim CD-ROM drives.
Side mounting brackets are needed to mount a slim CD-ROM drive in the
5013C-MT server.
You must power down the system before installing or removing a CD-ROM
drive. First, release the retention screws that secure the server unit to the
rack. Grasp the two handles on either side and pull the unit straight out
until it locks (you will hear a "click"). Next, depress the two buttons on the
top of the chassis to release the top cover and at the same time, push the
cover away from you until it stops. You can then lift the top cover from the
chassis to gain full access to the inside of the server.
With the chassis cover removed, unplug the power and data cables from
the drive. Then locate the locking tab at the rear of the drive. It will be on
the left side of the drive when viewed from the front of the chassis. Pull
the tab away from the drive and push the drive unit out the front of the
chassis. Add a new drive by following this procedure in reverse order.
You may hear a faint *click* of the locking tab when the drive is fully
inserted. Remember to reconnect the data and power cables to the drive
before replacing the chassis cover and restoring power to the system.