Supero SuperServer 5014C-M8, Руководство пользователя

Страница: 52 / 110

5-16
S
UPER
S
ERVER 5014C-M8 User's Manual
Wake-On-Ring
The Wake-On-Ring header is desig-
nated JWOR. This function allows
y o u r c o m p u t e r t o r e c e i v e a n d b e
"awakened" by an incoming call when
in the suspend state. See the table on
the right for pin definitions. You must
also have a WOR card and cable to
use this feature.
Pin
Number
1
2
Definition
Ground
Wake-up
Wake-On-Ring Pin Definitions
(JWOR)
SATA LED
The SATA LED header is desig-
nated JSLED. This header is used
to display all SATA activity. See
the table on the right for pin defini-
tions.
SATA LED
Pin Definitions
(JSLED)
Pin
Number
1
2
3
4
5
Definition
SATA1
SATA2
NC
NC
NC
Serial Ports
Two serial ports are included on
the motherboard: COM1 is a port
located under the parallel port and
COM2 is a header located on the
motherboard near the floppy con-
nector. See the table on the right
for pin definitions.
Serial Port Pin Definitions
(COM1, COM2)
Pin Number Definition
1 CD
2 RD
3 TD
4 DTR
5 Ground
Pin Number Definition
6
DSR
7 RTS
8 CTS
9 RI
10 NC
Note: Pin 10 is included on the header but not on
the port. NC indicates no connection.
Speaker Connector
Use the header on J9 to enable
either the internal or an external
speaker. To use the internal sys-
tem speaker, connect the speaker
wires to pins 3-4. If you wish to
u s e a n e x t e r n a l s p e a k e r , y o u
should jump pins 1 and 2.
Setting
Pins 1-2
Pins 3-4
Definition
Ext. Speaker
Int. Speaker
Speaker Jumper
Pin Definitions (J9)