Supero SuperServer 5014C-M8, Руководство пользователя

Страница: 22 / 110

2-4
S
UPER
S
ERVER 5014C-M8 User's Manual
2-4 Installing the System into a Rack
This section provides information on installing the SuperServer 5014C-M8
into a rack unit with the rack rails provided. If the server has already been
mounted into a rack, you can skip ahead to Sections 2-5 and 2-6. There are
a variety of rack units on the market, which may mean the assembly proce-
dure will differ slightly. You should also refer to the installation instructions
that came with the rack unit you are using.
Identifying the Sections of the Rack Rails
You may have received rack rail hardware with the SuperServer 5014C-
M8. (Two front inner rails should already be attached to the chassis.) This
hardware consists of two rear inner rails that secure to the chassis, one
on each side just behind the preinstalled front inner rails. Note that these
two rails are left/right specific.
Installing the Rear Inner Rails
First, locate the right rear inner rail (the rail that will be used on the right
side of the chassis when you face the front of the chassis). Align the two
square holes on the rail against the hooks on the right side of the chassis.
Securely attach the rail to the chassis with M4 flat head screws. Repeat
these steps to install the left rear inner rail to the left side of the chassis
(see Figure 2-1). You will also need to attach the rail brackets when
installing into a telco rack.
Locking Tabs: Both chassis rails have a locking tab, which serves two
functions. The first is to lock the server into place when installed and
pushed fully into the rack, which is its normal position. Secondly, these
tabs also lock the server in place when fully extended from the rack. This
prevents the server from coming completely out of the rack when you pull
it out for servicing.