Supero SuperServer 5014C-M8, Руководство пользователя

Страница: 96 / 110

C-2
S
UPER
S
ERVER 5014C-M8 User's Manual
Configuring BIOS for SATA RAID Functions (Native Mode)
1. Press the <Del> key during system bootup to enter the BIOS Setup Utility.
Note: If it is your first time powering on the system, we recommend you
load the Optimized Default Settings, as described in the next step.
2. Use the arrow keys to select the "Exit" Settings. Once in the "Exit"
settings, scroll down to select the item "Load Optimized Default Settings"
and press the <Enter> key. Select "OK" to confirm the selection. Press the
<Enter> key to load the BIOS default settings.
3. Use the arrow keys to select the "Advanced" menu in BIOS.
4. Scroll down to the item "Advanced Chipset Control" and press the <En-
ter> key to select this option.
5. Select the item "On-Chip Serial ATA", and press the <Enter> key. When
the sub-menu appears, select the item "Enhanced Mode".
6. Scroll up to "SATA Mode" and press the <Enter> key to select. When the
sub-menu appears, select "RAID".
7. Press "Esc" and scroll down to "Exit". Select "Save and Exit" from the
"Exit" menu. Press the <Enter> key to save the changes and exit the BIOS.
8. Once you've exited the BIOS Utility, the system will reboot.
SATA Operating Modes
You can select from the following modes: Auto, Combined, Enhanced, and
SATA Only Mode. The number of devices supported by these modes are listed
below:
SATA Only: A maximum of four devices are supported (4 SATA)
Auto Mode: A maximum of six devices supported (4 SATA + 2 IDE)
Enhanced Mode: A maximum of six devices supported (4 SATA + 2 IDE)
Combined Mode: A maximum of four devices supported (2 SATA + 2 IDE)