Supero SUPERSERVER 5013G-6, Руководство пользователя

Страница: 15 / 110

Chapter 1: Introduction
1-5
1-3 Server Chassis Features
The SuperServer 5013G-6/5013G-i is a scaleable 1U rackmount server plat-
form designed with some of today's most state-of-the-art features. The
following is a general outline of the main features of the SC810 chassis.
System Power
When configured as a SuperServer 5013G-6/5013G-i, the SC810 chassis
includes a single 250W power supply.
SCSI Subsystem (5013G-6 only)
The SCSI subsystem on the 5013G-6 supports two 80-pin SCA Ultra160
SCSI hard drives. (Standard 1" drives are supported. SCA = Single Con-
nection Attachment.) The SCSI drives are connected to an SCA backplane
that provides power, bus termination and configuration settings. The SCSI
drives are also hot-swap units.
Control Panel
The SC810's control panel provides important system monitoring and control
information. LEDs indicate power on, network activity, hard disk drive ac-
tivity and system overheat conditions. The control panel also includes a
main power button and a system reset button.
Rear I/O Panel
The SC810 is a 1U rackmount chassis. Its I/O panel provides one mother-
board expansion slot, one COM port (another is internal), two USB ports
(5013G-6 only), PS/2 mouse and keyboard ports, a graphics port and two
Ethernet ports. (See Figure 1-2.)