Supero SUPERSERVER 5013G-6, Руководство пользователя

Страница: 51 / 110

Chapter 5: Advanced Motherboard Setup
5-13
Serial Ports
Two serial ports are included on
the motherboard: COM1 is a port
located beside the mouse/key-
board ports and COM2 is a header
located on the motherboard near
PCI slot 6. See the table on the
right for pin definitions.
Pin Number Definition
1 DCD
2 Serial In
3 Serial O ut
4 DTR
5 G round
Pin Number Definition
6 DSR
7 RTS
8 CTS
9 RI
10 NC*
Serial Port Pin Definitions
(CO M1, CO M2)
NC indicates no connection.
HDD LED
An HDD LED connection is located
on pins 13 and 14 of JF1. Attach
the hard drive LED cable to display
disk activity (including SCSI and
IDE drives). See the table on the
right for pin definitions.
HDD LED Pin
Definitions
(JF1)
Pin
Number
13
14
Definition
Vcc
HD Active
Power LED
The Power LED connection is lo-
cated on pins 15 and 16 of JF1.
Refer to the table on the right for
pin definitions.
NMI Button
The non-maskable interrupt button
header is located on pins 19 and
20 of JF1. Refer to the table on
the right for pin definitions.
Pin
Number
19
20
Definition
Control
Ground
NMI Button Pin
Definitions (JF1)
Pin
Number
15
16
Definition
Vcc
Control
PWR_LED Pin Definitions
(JF1)
IR Connector
The infrared connector is located
on at J12. See the table on the
right for pin definitions. Refer to
the Technical Support section of
our web page for information on
the infrared devices you can con-
nect to the system.
Infrared
Pin Definitions
(J12)
Pin
Number
1
2
3
4
5
6
Definition
+5V
CIR
IRRX
Ground
IRTX
NC