Supero SUPERSERVER 5013G-6, Руководство пользователя

Страница: 43 / 110

Chapter 5: Advanced Motherboard Setup
5-5
5-5 Installing Processors
Avoid placing direct pressure to the top of the processor
package. Always remove the power cord first before adding,
removing or changing any hardware components.
Processor Support
The P4SGR/P4SGE has one 478-pin microPGA socket, which supports Intel
Pentium 4 processors of up to 3.06 GHz.
!
1. Lift the lever on the CPU socket.
Socket Lever
2. Install the CPU in the socket. Make sure that
Pin 1 of the CPU is seated on Pin 1 of the socket
(both corners are marked with a triangle).
3. Press the lever down until
you hear it *click* into the
locked position.
Socket lever in
locked position
4. Apply the proper amount of thermal com-
pound to the CPU die. Place the heatsink on
top of the CPU and press firmly downward -
do not twist or slide the heatsink to seat
the thermal compound.
5. Secure the heat sink by lock-
ing the retention clips into their
proper position.
Retainer clip
attachment
point