Supero AS-1011M-Ni, Руководство пользователя

Страница: 41 / 100

Chapter 5: Advanced Motherboard Setup
5-7
5-5 I/O Ports
The I/O ports are color coded in conformance with the PC 99 specifi cation. See
Figure 5-2 below for the colors and locations of the various I/O ports.
Figure 5-2. Rear Panel I/O Ports
5-6 Installing Memory
CAUTION
Exercise extreme care when installing or removing memory modules
to prevent any possible damage.
1. Insert each memory module vertically into its slot, paying attention to the notch
along the bottom of the module to prevent inserting the module incorrectly (see
Figure 2-2). Populate both slots 1A and 1B fi rst. See support information below.
2. Gently press down on the memory module until it snaps into place.
Note: each processor has its own built-in memory controller. 512 MB, 1 GB, and 2
GB memory modules are supported. It is highly recommended that you remove the
power cord from the system before installing or changing any memory modules.