Supermicro SUPERSERVER 8016B-TLF, Руководство пользователя

Страница: 83 / 108

Chapter 7: BIOS
7-13
Ports, 10 USB Ports, and 12 USB Ports . (If this item is set to Enabled, USB 2.0
Controller will be enabled.)
USB Port Confi guration
This feature is used to confi gure USB port settings. The Options are: 6x6 USB
Ports and 8x4 USB Ports.
USB 2.0 Controller
Select Enabled to activate the USB 2.0 Controller. The options are Enabled and
Disabled. ( Note : If the item - USB Functions is enabled, USB 2.0 Controller will
always be enabled. When the item - USB Functions is set to Disabled, the user
has the option to enable or disable USB 2.0 Controller.)
GPI09 Confi guration
This feature is used to confi gure the GPI09 computer electronics meter settings.
The Options are: WOL (Wake-On-LAN) Enabled , High, and Low.
HDA Controller
Select Enabled to enable the High-Defi nition Audio Controller. The settings are
Enabled and Disabled.
SMBUS Controller
Select Enabled to enable the System_Management Bus Controller. The settings
are Enabled and Disabled.
SLP_S4# Min. Assertion Width
This feature allows the user to set the minimum SLP_S4# Assertion Width to make
sure that DRAMs have safe power cycles. The settings are 4 to 5 seconds, 3 to
4 Seconds, 2 to 3 Seconds, and 1 to 2 Seconds.
Restore on AC Power Loss
Use this feature to set the power state after a power outage. Select Power-Off for
the system power to remain off after a power outage. Select Power-On for the
system power to be turned on after a power outage. Select Last State to allow the
system to resume its last state before the power outage. The options are Power-On,
Power-Off and Last State .
SATA Master Break Event
If this feature is set to Enabled, activities on the SATA master drive will break from
the C3/C6 state. The settings are Enabled and Disabled .