Supermicro SUPERSERVER 8016B-TLF, Руководство пользователя

Страница: 54 / 108

5-22
S
UPER
S
ERVER 8016B-TLF User's Manual
BMC Enable
Jumper JPB1 allows you to enable
the embedded WPCM 450 BMC
(Baseboard Management) Controller
to provide IPMI 2.O/KVM support on
the motherboard. See the table on the
right for jumper settings.
BMC Enable
Jumper Settings
Jumper Setting Defi nition
Pins 1-2 BMC Enable
Pins 2-3 Normal (Default)
BMC Reset
Use jumper JPRST1 to reset the BMC
settings on the motherboard. See the
table on the right for jumper settings.
BMC Reset
Jumper Settings
Jumper Setting Defi nition
Closed BMC Reset
Open Normal (Default)
Manufacturer Mode Select
Close jumper J35 (JPME1) to bypass
SPI fl ash security and force the sys-
tem to use Manufacturer Mode, which
will allow the user to fl ash the system
fi rmware from a host server to modify
system settings. See the table on the
right for jumper settings.
ME Mode Select
Jumper Settings
Jumper Setting Defi nition
1-2 Manufacture Mode
2-3 Normal (Default)
ME Recovery
J36 (JPME2) is used for ME Firmware
Recovery mode, which will limit system
resource for essential function use
only without putting restrictions on
power use. In single operation mode,
online upgrade will be available via
Recovery mode. See the table on the
right for jumper settings.
ME Recovery
Pin Defi nitions
Pin# Defi nition
1 No Connection
2 Signal
3 Ground